Duratec Clear Hi-Gloss Gel Coat Additive

When repairing or using with gel coat outside of a mold, what is the proper mix ratio?
4 to 1
3 to 1
2 to 1
1 to 1
How much MEKP is needed to catalyze Duratec Hi-Gloss Additive?
1%
1.25%
1.50%
2%
How much Duratec Hi-Gloss Additive needs to be added to tooling gel coat?
5 to 15%
25 to 30%
40 to 50%
75 to 80%
Wax is needed to help gel coat cure fully with Duratec Hi-Gloss Additive
True
False
What is the approximate time for air cure with Duratec Hi-Gloss Additive when mixed with gel coat?
1 – 2 hrs.
6 – 8 hrs.
12 – 14 hrs.
24 – 48 hrs.
What does Duratec Hi-Gloss Additive do to the porosity of the gel coat?
Lower
Raise
Stays the same
When using Duratec Hi-Gloss Additive in a plug, what sand paper is suggested to use?
Thinner
Wax
Resin
Glue
When calculating time for cure, what is the optimal temperature?
60° F
77° F
82° F
95° F
To thin Duratec Hi-Gloss Additive to the desired spray viscosity how much is recommended in gel coat?
None
5-10%
25-30%
50%
It is NOT necessary to sand Duratec Hi-Gloss Additive once cured
True
False
{"name":"Composite Laminate Cutting Quiz", "url":"https://www.quiz-maker.com/QWJIEWU","txt":"Question 1, Question 2, Question 3","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}
Quiz Maker Logo Make your own Quiz
Powered by: Quiz Maker